# 
#                   MjSip-1.6 Configuration File
# ________________________________________________________________
#
# This file inclues all MjSip configuration parameters.
# MjSip parameters are organized into 6 sections:
#  o Section 1: SipStack base configuration
#  o Section 2: Logs
#  o Section 3: SipProvider configuration
#  o Section 4: Server configuration
#  o Section 5: UA configuration
#  o Section 6: SBC configuration
#



# ________________________________________________________________
#
# Section 1: SipStack base configuration
# ________________________________________________________________
#
# Normally, you do not have to change the base configuration,
# and you can go directly to Section 2.
# SIP and transport layer configurations are handled in Section 3. 
#

# Default SIP port
# Note that this is not the port used by the running stack, but simply the standard default SIP port.
# Normally it sould be set to 5060 as defined by RFC 3261. Using a different value may cause
# some problems when interacting with other unaware SIP UAs. 
# Default value: default_port=5060
#default_port=5060

# Default supported transport protocols.
# Default value: default_transport_protocols=udp,tcp
#default_transport_protocols=udp

# Default max number of contemporary open transport connections.
# Default value: default_nmax_connections=32
#default_nmax_connections=0

# Whether adding 'rport' parameter on via header fields of outgoing requests.
# Default value: use_rport=yes
#use_rport=no

# Whether adding (forcing) 'rport' parameter on via header field of incoming responses.
# Default value: force_rport=no
#force_rport=yes

# Default max-forwards value (RFC3261 recommends value 70).
# Default value: max_forwards=70
#max_forwards=10

# Starting retransmission timeout (milliseconds); called T1 in RFC2361; they suggest T1=500ms 
# Default value: retransmission_timeout=500
#retransmission_timeout=2000 

# Maximum retransmission timeout (milliseconds); called T2 in RFC2361; they suggest T2=4sec 
# Default value: max_retransmission_timeout=4000  
#max_retransmission_timeout=4000  

# Transaction timeout (milliseconds); RFC2361 suggests 64*T1=32000ms 
# Default value: transaction_timeout=32000
#transaction_timeout=10000    

# Clearing timeout (milliseconds); T4 in RFC2361; they suggest T4=5sec 
# Default value: clearing_timeout=5000
#clearing_timeout=5000
       
# Whether using only one thread for all timer instances.
# Default value: single_timer=no
#single_timer=yes

# Whether 1xx responses create an "early dialog" for methods that create dialog.
# Default value: early_dialog=no
#early_dialog=yes

# Default 'expires' time in seconds. RFC2361 gives as default value expires=3600 
# Default value: default_expires=3600
#default_expires=1800

# UA info included in request messages (in the User-Agent header field).
# Use 'NONE' string or let it blank if the User-Agent header filed must be added.
# Default: ua_info=<the mjsip release>
# ua_info=NONE

# Server info included in request messages (in the Server header field).
# Use 'NONE' string or let it blank if the Server header filed must be added.
# Default: server_info=<the mjsip release>
# server_info=NONE



# ________________________________________________________________
#
# Section 2: Logs
# ________________________________________________________________
#
# Change these parameters in order to customize how log-files are handled.
# By default log files are placed into the ./log folder, they are not rotated,
# and the maximum size is 2M.
#

# Log level. Only logs with a level less or equal to this are written.
# Default value: debug_level=3
#debug_level=0

# Path for the log folder where log files are written.
# By default, it is used the "./log" folder
# Use ".", to store logs in the current root folder
# Default value: log_path=./log
#log_path= .

#The size limit of the log file [kB].
# Default value: max_logsize=2048
#max_logsize=4096

# The number of rotations of log files. Use '0' for NO rotation, '1' for rotating a single file.
# Default value: log_rotations=0
#log_rotations=4

# The rotation period in MONTHs, DAYs, HOURs, or MINUTEs.
# example: "log_rotation_time=3 MONTHS", that is equivalent to "log_rotations=90 DAYS"
# Default value: log_rotation_time=2 MONTHS
#log_rotation_time=7 DAYS



# ________________________________________________________________
#
# Section 3: SipProvider configuration
# ________________________________________________________________
#
# Change these parameters in order to customize the SIP transport layer.
# Usually you have to deal with some of these configuration parameters.
#

# Via address/name.
# Use 'AUTO-CONFIGURATION' for auto detection, or let it undefined.
# Default value: host_addr=AUTO-CONFIGURATION
#host_addr=192.168.0.33

# Local SIP port 
# Default value: host_port=5060
#host_port=5060  

# Network interface (IP address) used by SIP.
# Use 'all-interfaces' for binding SIP to all interfaces (or let it undefined).
# Default value: host_ifaddr=ALL-INTERFACES
#host_ifaddr=192.168.0.33

# List of enabled transport protocols (the first protocol is used as default)
# Default value: transport_protocols=udp
#transport_protocols=udp,tcp

# Max number of contemporary open transport connections.
# Default value: nmax_connections=32
#nmax_connections=0

# Outbound proxy (host_addr[:host_port]).
# Use 'NONE' for not using an outbound proxy (or let it undefined).
# Default value: outbound_proxy=NONE
#outbound_proxy=proxy.wonderland.net:5060

# Whether logging all packets (including non-SIP keepalive tokens).
# Default value: log_all_packets=no
#log_all_packets=yes



# ________________________________________________________________
#
# Section 4: Server configuration
# ________________________________________________________________
#
# Change these parameters in order to customize the Server behaviour.
# You need to edit this section only if you are using a MjSip Server.
#

# The domain name(s) that the server administers.
# It lists the domain names for which the Location Service wmaintains user bindings. 
# Use 'auto-configuration' for automatic configuration of the domain name.
#domain_names=wonderland.net biloxi.example.com
#domain_names=AUTO-CONFIGURATION

# Whether consider any port as valid local domain port (regardless which sip port is used).
# Default value: domain_port_any=no
#domain_port_any=yes

# Whether the Server should act as Registrar (i.e. respond to REGISTER requests).    
# Default value: is_registrar=yes
#is_registrar=no

# Maximum expires time (in seconds).
# Default value: expires=3600
#expires=1800

# Whether the Registrar can register new users (i.e. REGISTER requests from unregistered users).    
# Default value: register_new_users=yes
#register_new_users=no

# Whether the Server relays requests for (or to) non-local users.   
# Default value: is_open_proxy=yes
#is_open_proxy=no

# The type of location service.
# You can specify the location service type (e.g. local, ldap, radius, mysql)
# or the class name (e.g. local.server.LocationServiceImpl).
# Default value: location_service=local
#location_service=ldap

# The name of the location DB.
# Default value: location_db=users.db
#location_db=config/users.db

# Whether location DB has to be cleaned at startup.
# Default value: location_db_clean=no
#location_db_clean=yes

# Whether the Server authenticates local users.   
# Default value: do_authentication=no
#do_authentication=yes

# The authentication scheme.
# You can specify the authentication scheme name (e.g. Digest, AKA, etc.)
# or the class name (e.g. local.server.AuthenticationServerImpl).
# Default value: authentication_scheme=Digest
#authentication_scheme=AKA

# The authentication realm.
# If not defined or equal to 'NONE' (default), the used via address is used instead.
# Default value: authentication_realm=NONE
#authentication_realm=wonderland.net

# The type of authentication service.
# You can specify the authentication service type (e.g. local, ldap, radius, mysql)
# or the class name (e.g. local.server.AuthenticationServiceImpl).
# Default value: authentication_service=local
#authentication_service=ldap

# The name of the authentication DB.
# Default value: authentication_db=aaa.db
#authentication_db=config/aaa.db

# Whether maintaining a complete call log.   
# Default value: call_log=no
#call_log=yes

# Whether the server should stay in the signaling path (uses Record-Route/Route).
# Default value: on_route=no
#on_route=yes

# Whether implementing the RFC3261 Loose Route (or RFC2543 Strict Route) rule.
# Default value: loose_route=yes
#loose_route=no

# Whether checking for loops before forwarding a request (Loop Detection). In RFC3261 it is optional.
# Default value: loop_detection=yes
#loop_detection=no

# Sequence of pairs of username or phone prefix and corresponding nexthop address.
# It provides static rules for routing number-based SIP-URL the server is responsible for.
# Use "default" (or "*") as default prefix.
# Example, request URL sip:01234567@zoopera.com received by a server responsible for domain name 'zoopera.com'.
#phone_routing_rules={prefix=0123,nexthop=127.0.0.2:7002} {prefix=*,nexthop=127.0.0.3:7003}

# Sequence of pairs of destination domain and corresponding nexthop address.
# It provides static rules for routing domain-based SIP-URL the server is NOT responsible for.
# It make the server acting (also) as 'Interrogating' Proxy, i.e. I-CSCF in the 3G networks.
# domain_routing_rules={domain=wonderland.net,nexthop=neverland.net:5060} */


# ________________________________________________________________
#
# Section 5: UA configuration
# ________________________________________________________________
#
# Change these parameters in order to customize the UA profile.
# You need to edit this section only if you are using a MjSip UA or
# you are managing 3PCC services.
#

# User's AOR (Address Of Record), used also as From URL.
# The AOR is the SIP address used to register with the user's registrar server (if requested).
# The address of the registrar is taken from the hostport field of the AOR, i.e. the value(s) host[:port] after the '@' character.
# If not defined (default), it equals the 'contact_url' parameter
#from_url=sip:alice@wonderland.net

# Contact URL.
# If not defined (default), it is formed by sip:username@host_address:host_port
#contact_url=sip:alice@192.168.0.55:5070
  
# User's name (used to build the contact_url if not explitely defined).
#username=alice

# User's realm.
#realm=wonderland.net

# User's passwd.
#passwd=mypassword

# Path for the 'ua.jar' lib, used to retrive various UA media (gif, wav, etc.).
# Default value: ua_jar=lib/ua.jar
#ua_jar=./ua.jar

# Path for the 'contacts.lst' file where save and load the list of VisualUA contacts.
# Default value: contacts_file=config/contacts.lst
#contacts_file=contacts.lst

# Whether registering with the registrar server.
# Default value: do_register=no
#do_register=yes

# Whether unregistering the contact address.
# Default value: do_unregister=no
#do_unregister=yes

# Whether unregistering all contacts beafore registering the contact address.
# Default value: do_unregister_all=no
#do_unregister_all=yes

# Expires time.
# Default value: expires=3600
#expires=1800

# Rate of keep-alive packets sent toward the registrar server (in milliseconds).
# Set keepalive_time=0 to disable the sending of keep-alive datagrams.
# Default value: keepalive_time=0
#keepalive_time=8000

# Automatic call a remote user secified by the 'call_to' value.
# Use value 'NONE' for manual calls (or let it undefined).
# Default value: call_to=NONE
#call_to=sip:alice@wonderland.net   
   
# Automatic answer time in seconds; time<0 corresponds to manual answer mode.
# Default value: accept_time=-1       
#accept_time=0

# Automatic hangup time (call duartion) in seconds; time<=0 corresponds to manual hangup mode.
# Default value: hangup_time=-1
#hangup_time=10

# Automatic call transfer time in seconds; time<0 corresponds to no auto transfer mode.
# Default value: transfer_time=-1
#transfer_time=10

# Automatic re-inviting time in seconds; time<0 corresponds to no auto re-invite mode.
# Default value: re_invite_time=-1
#re_invite_time=10

# Redirect incoming call to the secified url.
# Use value 'NONE' for not redirecting incoming calls (or let it undefined).
# Default value: redirect_to=NONE
#redirect_to=sip:alice@wonderland.net

# Transfer calls to the secified url.
# Use value 'NONE' for not transferring calls (or let it undefined).
# Default value: transfer_to=NONE
#transfer_to=sip:alice@wonderland.net

# No offer in the invite.
# Default value: no_offer=no
#no_offer=yes

# Whether using audio.
# Default value: audio=no
#audio=yes

# Whether using video.
# Default value: video=no
#video=yes

# Whether playing in receive only mode.
# Default value: recv_only=no
#recv_only=yes

# Whether playing in send only mode.
# Default value: send_only=no
#send_only=yes

# Whether playing a test tone in send only mode.
# Default value: send_tone=no
#send_tone=yes

# Audio file to be played.
# Default value: send_file=NONE
#send_file=audio1.in

# Audio file to be recored.
# Default value: recv_file=NONE
#recv_file=audio1.out

# Audio port.
# Default value: audio_port=21068
#audio_port=4000

# Audio avp.
# Default value: audio_avp=0
#audio_avp=101

# Audio codec.
# Default value: audio_codec=PCMU
#audio_codec=GSM

# Audio sample rate.
# Default value: audio_sample_rate=8000
#audio_sample_rate=16000

# Audio sample size.
# Default value: audio_sample_size=1
#audio_sample_size=2

# Audio frame size.
# Default value: audio_frame_size=160
#audio_frame_size=500

# Video port.
# Default value: video_port=21070
#video_port=4002

# Video avp.
# Default value: video_avp=17
#video_avp=101

# Whether using JMF for audio/video streaming.
# Default value: use_jmf=no
#use_jmf=yes

# Whether using RAT (Robust Audio Tool) as audio sender/receiver.
# Default value: use_rat=no
#use_rat=yes

# RAT command-line executable.
# Default value: bin_rat=rat
#bin_rat=c:\programmi\mbone\rat

# Whether using VIC (Video Conferencing Tool) as video sender/receiver.
# Default value: use_vic=no
#use_vic=yes

# VIC command-line executable.
# Default value: bin_vic=vic
#bin_vic=c:\programmi\mbone\rat


# ________________________________________________________________
#
# Section 6: SBC
# ________________________________________________________________
#
# Change these parameters in order to customize the SessionBorderController (SBC) behaviour.
# You need to edit this section only if you are using a SBC.
#

# Maximum time that the UDP relay remains active without receiving UDP datagrams (in milliseconds).
# Default value: relay_timeout=60000

# Refresh time of address-binding cache (in milliseconds)
# Default value: binding_timeout=3600000

# Minimum time between two changes of peer address (in milliseconds)
# Default value: handover_time=0

# Rate of keep-alive datagrams sent toward all registered UAs (in milliseconds).
# Set keepalive_time=0 to disable the sending of keep-alive datagrams
# Default value: keepalive_time=0

# Whether sending keepalive datagram to all contacted UAs (also toward non-registered UAs)
# Default value: keepalive_aggressive=no

# Whether intercepting media traffics.
# Default value: do_interception=no

# Whether injecting new media flows.
# Default value: do_active_interception=no

# Sink address for media traffic interception.
# Default value: sink_addr=127.0.0.1

# Sink port for media traffic interception.
# Default value: sink_port=0

# Media address.
# Default value: media_addr=0.0.0.0

# Available media ports.
# Default value: media_ports=41000-41499

# Backend proxy where all requests not coming from it are passed to. 
# It can be specified as FQDN or host_addr[:host_port].
# Use 'NONE' for not using a backend proxy (or let it undefined).
# Default value: backend_proxy=NONE
#backend_proxy=127.0.0.2:5069